Honeywell Udc1200 Micro Pro Manual
The UDC1200 & UDC1700 are microprocessor-based 1/16 DIN and 1/8 DIN controllers, which combine a high degree of functionality and reliability at low cost. They are fully dedicated to monitor and control temperatures, pressures and levels in a wide range of applications such as environmental chambers, furnaces, ovens, packaging machines and other applications in plastics and the food and beverage industries. The large and easy-to-read dual 4-digit display and tactile keypad make the UDC1200 and UDC1700 easy to configure and use. Their outstanding flexibility enables you to configure any unit for any application and change it if required.
For the thousands of satisfied UDC1000/1500 users, the UDC1200/ 1700 controllers are downward compatible to existing UDC1000/1500 applications and installations.
Features:
• Two 4-digit displays with 7 LED segments, each configurable for
- PV and SP (non adjustable)
- PV and SP (adjustable)
- PV and Ramping SP
- PV only
Easier to configure
Two different configuration levels (Configuration mode and set-up mode) provide easy access to parameters. A 4-digit security code prevents unauthorized changes.
Moisture reistant front-face
Meets NEMA 3 / IP65 front-face protection against dust and water.
Universal input
Accepts seven different types of thermocouples, RTDs, current and voltage linear inputs. All inputs are configurable as standard.
Universal power supply
The UDC1200 and UDC1700 can operate on any line voltage from 90 Vac to 264 Vac at 50/60 Hz. A 24/48 Vac/dc model is available as an option.
Easy upgrade
All the option boards are jumper free and detected automatically by the instrument.
Easy output selection
All the outputs (including the control output) of the instrument can be changed to meet the exact customer’s needs.
Alarm strategy
Two soft alarms for PV, deviation high/low/absolute. A special loop alarm is also provided to detect faults in the control loop by continuously analyzing the PV response to the control output. Alarm inhibit is available on power up and setpoint switching. <>
Manual/Automatic mode
Manual control (via bumpless transfer) is enabled by simply pressing the frontface AUTO/MAN key. The “SET” LED flashes and the output power is displayed on the lower display. Output can be adjusted with the upper and lower keys.
Pre-tuning and self-tuning strategy
Pre-tuning is used to set up the PID parameters close to the optimum values, which the self-tuning algorithm uses to subsequently optimize the tuning parameters.
Limit controller
Packaged in 1/16 DIN, the UDC1200 limit controller is designed to provide a safety shut-off and optional alarms for use in a wide variety of applications.
The Honeywell UDC1200 is a microprocessor-based 1/16 DIN controller. Although the UDC1200 is the introductory range to the Honeywell range of Universal Digital Controllers, this ‘Micro-Pro’ range offers a high degree of functionality and reliability whilst maintaining a competitive cost, particularly attractive to OEM type applications. For 1/8 DIN panel mount installs, please see the UDC1700 Universal Digital Controller.
The Honeywell UDC1200 Universal Digital Controller is fully dedicated to monitor and control temperatures, pressures and levels in a wide range of applications. Existing installations include environmental chambers, furnaces, ovens, packaging machines and other applications in plastics and the food and beverage industries. The large and easy-to-read dual 4-digit display and tactile keypad make the Honeywell UDC1200 easy to configure and use. Its enhanced flexibility enables easy configuration for any application.
Micro Center
HONEYWELL UDC1200 & UDC1700 MICRO-PRO UNIVERSAL DIGITAL CONTROLLER PRODUCT MANUAL (51-52-25-123-EN) UDC1200 UDC1700 Tolerance +0.5, -0.0mm CAUTION: Installation should be only performed by technically competent personnel. Local Regulations regarding electrical installation & safety must be observed. UDC1200 and UDC1700. The current setpoint is selected by a digital input. This option is exclusive with UDC1200 limit model remote alarm reset. Communication An optional RS485 communications interface is available on the UDC1200 and UDC1700. It provides a link between up to 32 units and a host computer through ASCII or Modbus. Product type: UDC1200 Universal Digital Controller. DC1201: 1/16 DIN Controller: 48x48mm, RTD or Linear mV. Output 1: 1 = Relay. Output 2: 0 = None. Output 3: 0 = None. Communications: 0 = No Selection. Power Supply: 1 = Power Supply 90 to 264 Vac. Manuals (Single sheet Concise manuals or UDC1200): 0 = English (51-52-25-123).
Features of the Honeywell UDC1200 Universal Digital Controller
Micropro Computers
- 1/16 DIN Panel Mount Controller (45x45mm cut-out dimension). Depth approx 110mm.
- IP66 front panel face “washdown” protection
- Inputs from a range of thermoocouples, RTDs, mA or Voltage
- Up to 3 outputs, including analogue mA or voltage, Electro-Mechanical Relays (EMR) and Solid State Relays (SSR)
- On board communications including RS485 Modbus and ASCII
- UK mains powered or 24…48Vac/dc option
Honeywell UDC1200 Universal Digital Controller, base models (input selections)….
- DC1201 – 3-wire RTD (PT100) or Linear mV
- DC1202 – Thermocouple (R, S, J, T, K, L, B, C, N)
- DC1203 – Linear milliamp (e.g. 4-20mA)
- DC1204 – Linear voltage (e.g. 0-10V)
- DC120L – Limit Controller
- DC120T – TPSC Controller (thermocouple factory set)
Honeywell Udc1200 Micro-pro Manual
Fluidic hold an exclusive channel partner agreement with Honeywell Field Products division. Our instrumentation engineers are product trained and able to help with instrument selection within the full Honeywell Field Product instrumentation portfolio including the entire Universal Digital Controller family, which incorporates not only the UDC1200 but the UDC1700, UDC2500 and UDC3500. Fluidic order directly with the Honeywell factory via an exclusive channel partner web portal and hold stock for some common lines. Please contact either office for more information (Glasgow 0141 641 5920 or Warrington 01925 572401). Radman vpn for mac.